10hp air compressor 500 liters in laser cutting machine

10hp air compressor 500 liters in laser cutting machine

Maintenance of 10hp air compressor 500 liters in laser cutting machine Air compressor is an integral part of the laser cutting machine system. The following is the maintenance work of its main com...

Get Price Send Inquiry

Maintenance of 10hp air compressor 500 liters in laser cutting machine

Air compressor is an integral part of the laser cutting machine system. The following is the maintenance work of its main components.

Air filter element. Generally, the dust and impurities on the surface of the air filter element should be removed every 500 hours, and it should be checked every 2000 hours for replacement. The inspection or replacement cycle can be extended or shortened according to the dust content. Email:info@fntcompressor.com

Intake valve seal. When the 10hp air compressor 500 liters of the laser cutting machine works every 4000 hours, check the condition of the seal ring and replace it if necessary.

10hp air compressor 500l oil. Check that the lubricating oil is sufficient every 1,000 hours and replace it with new oil every 4000 hours.

Oil filter. New parts are replaced every 2000 hours. KINGBULL screw air compressor manufacturers provide good 10 hp screw air compressor for you.

KINGBULl 10hp air compressor 500l oil

Oil vapor separator. New items need to be replaced every 4000 hours.

Minimum pressure valve. Clean it every 4000 hours and check whether the opening pressure is normal.

10hp air compressor 500l safety valve. Check for responsiveness every 4000 hours.

Drain valve. Discharge moisture and dirt every 2000 hours. Email:info@fntcompressor.com

Transmission belt. The tightness should be adjusted every 2000 hours, the wear condition should be checked every 4000 hours, and it should be determined whether it needs to be replaced according to the wear condition.

Motor maintenance. Perform maintenance according to the motor instruction manual.

In order to make the permanent magnet variable frequency 10hp air compressor 500 liters of the laser cutting machine operate normally and reliably and ensure the service life of the unit, a detailed maintenance plan must be formulated, and scheduled operations, regular maintenance, and regular inspection and maintenance must be performed to keep the 10hp air compressor 500l unit clean, no oil, no dirt.

permanent magnet variable frequency 10hp air compressor 500 liters

The maintenance of 10hp air compressor 500l auxiliary equipment cold and dry machine

  1. Drain water 3 to 8 times a day (depending on the air humidity). And drain the air and water in the 10hp air compressor 500lmachine after work;
  2. Clean the air filter element once a month.
  3. Dust removal and cleaning of the cooling fins of the condenser once a month.
  4. Replace the air filter element every six months. Email:info@fntcompressor.com

Maintenance of 10hp air compressor 500 liters regulated power supply

  1. After the new regulated power supply has been running for one month, cut off the main power supply and re-tighten all connection terminals in the regulator, especially the main circuit. If you are looking for high quality screw air compressor manufacturers, please contact KINGBULL air compressor factory. You will get the highest configuration air compressor at the same price.
  2. Check the elasticity of the sliding carbon brush every three months. Use dry compressed air to blow out the toner and dust adhered to the components in the regulator.Maintenance of 10hp air compressor 500 liters regulated power supply

Looking for Air Compressors

Please fill out the form below. We can provide you with more useful information

The tags : | | | |

Looking for Air Compressors

Please fill out the form below. We can provide you with more useful information